Voodoo3 3500 Windows(r) 9x Driver Kit -------------------------------------- Voodoo3 3500(tm) Driver kit: 1.04.02 Voodoo3 Win9x 2D/3D Display Drivers: 4.12.01.1222 Voodoo3 Glide(tm) 2.X Driver: 2.61.00.0518 Voodoo3 Glide 3.X Driver: 3.10.00.0518 Voodoo3 3dfx Tools: 1.5.6.66 OpenGL(r) Driver Version: 1.0.0.0508 ICD Copyright ( 1998-2000 3dfx Interactive, Inc. ) All Rights Reserved NOTE: Use of this software is subject to the terms in the 3dfx license agreement. 3dfx Interactive, Inc. Website: http://www.3dfx.com This product may be covered by one or more of the following US patents: 5,724,561 5,740,343 5,808,621 5,822,452 5,831,624 5,870,102 ======================================================================= What's in the distribution? ======================================================================= This distribution contains Voodoo3 drivers and 3dfx Tools for Windows 95/98. The DirectDraw portion of the drivers supports Direct3D when using DirectX 7.0 NOTE: DirectX 7.0 redistributable files should be used with these drivers! Requirements ------------ - Windows 95/98 - PC with a Pentium, Pentium II, or Pentium Pro Processor, Cyrix Mx, Cyrix M2, AMD K6, AMD K62 and AMD K63 and a free AGP or PCI slot - 16MB of RAM ======================================================================= Installation ======================================================================= The following two sections will describe how to install the software for your new 3dfx V3 3500 card. ***The correct sequence must be followed for a proper installation of this driver*** FRESH INSTALLATION ------------------ NOTE: Complete Steps 1 and 2 before removing your existing 2D card. 1) Before removing your existing 2D card switch the video driver to Standard VGA. Click Start, Control Panel. Double-click on Display. Select 640X480 and 16 colors. Accept the changes. 2) Power off the system and remove your existing 2D card. 3) Install the Voodoo3 Card in a free AGP or PCI Slot 4) Power on the system and verify that video appears during P.O.S.T. 5) Start Windows in normal mode (Once Windows starts you may be notified that no video device exists, click Cancel if this message appears) 6) Now follow sections A and B. UPGRADE EXISTING VOODOO3 DRIVER ------------------------------- 1) Follow sections A and B. SECTION A: INSTALLING THE DRIVER -------------------------------- a) Open the directory where the files were extracted to. b) Select Drivers\Setup.Exe c) When prompted if you wish to install the driver, click 'Yes'. SECTION B: INSTALLING 3DFX TOOLS -------------------------------- d) Uninstall all previous versions of 3dfx Tools. e) Open the directory where the files were extracted to. f) Select 3dfxTool\Setup.Exe g) Follow the instructions on the screen. h) When prompted if you wish to restart your computer, click 'Yes'. Limitations ----------- Running 640x480 16 Color will run SUPERVGA.DRV or VGA.DRV. No Voodoo3 features will be used. Switch to a different resolution or color depth. Full windowed hardware acceleration with this version of the drivers is only possible when running at 16bpp modes. Troubleshooting --------------- Problem: After installing the card, the system still detects my old card even though it is no longer in the system. Resolution: See Step 2 of the "Fresh Installation" instructions.